Cylinder Block Refurbishment Tools

Available Products

Twinspark and JTD Sump Removal Tool Set

Kit comprises of the two special tools you will need to remove the sump tray. More details

£24.77

Twinspark Crankshaft Locking Tool

If your crankshaft bolt is too tight to shift normally this is the tool for you. More details

£5.13

Twinspark Balance Shaft Locking Tool

Tool is used to lock the pulley on the end of the balance shafts so that the bolt holding the pulley bolt can be removed without damaging the pulley. More details

£3.84

Crankcase Cigarette Seal Installer - A3.0113

Use this tool to install the "cigarette seals" in the crankcase of Twincam engines. More details

£31.76

Pinion/Crankshaft Nut Tool - A.5.0114

This tool is used to remove the nut on the diff pinion and the crankshaft nut on the 102, 105 and Montreal (diff pinion nut only) series engines. More details

£36.18

Twincam Engine Cylinder Liner Retaining Tool - A.2.0117

Simple little tool for holding the liners in place More details

£4.00

4,6 & 8 Cylinder Flywheel Locking Tool

This tool is ideal if you want to lock the flywheel in position while you are replacing the clutch etc. More details

£24.87

4 & 6 Cylinder Flywheel Locking Tool

This tool is ideal if you want to lock the flywheel in position while you are replacing the clutch etc. More details

£20.73

V8 Crankshaft Nut Tool

This is the tool you need to slacken off the Montreal's large castellated ring nut. More details

£49.50

Torque Angle Gauge

Ideal tool when refitting your cylinder head. Do not quess the angle, get it right every time More details

£12.72

1.3 JTDm Crankshaft Pulley Flange Holding Tools

Great little tool for holding the crankshaft pulley More details

£4.34

Camshaft Alignment Tools 1.4 MultiAir and 1.3 JTDm engines

You need this tool to ensure the camshafts in the correct position More details

£25.67

41mm A/F thin walled socket

The tool you need to take off and replace your V6's crank pulley nut More details

£18.62

V6 piston liner hold down tool - 24 valve

If you are lifting the head on a V6 engine you need hold down the liners More details

£31.23

Alfa Romeo 164 V6 Auxillary Belt Tensioner Detensioner Pin - 1.821.271..000

Use this tool to lock off the auxillary belt tesioner while you remove the belt More details

£4.98

Ribe tool for removing the clutch fixing screws

You will need one of these to take off the clutch pressure plate. More details

£12.95

V6 & Twinspark Spark Plug Wrench

Believe it or not but this is the ideal tool to taking the spark plugs out of your V6 engine! More details

£15.10

V6 Crankcase Seal Installer

A very useful tool if you need to replace the crank seal behind the clutch More details

£45.20

6 Cylinder 2600 Rear Crankshaft Oil Seal Installation Tool

6 Cylinder 2600 Rear Crankshaft Oil Seal Installation Tool More details

£48.00

V6 24 Valve Oil Filter Wrench

Ideal tool for removing the oil filter on V6 24 valve engines More details

£10.36

Montreal V8 Head Lifting Tool - A.2.01931

If you are going to left the head(s) on your V8 this is the tool to use. More details

£51.75

Montreal V8 Cylinder Head Nut Tool - A.5.0170

Montreal V8 cylinder head nut tool More details

£21.60

Home | About TotallyAlfa | Delivery Information | Terms & Conditions | Search TotallyAlfa | Contact Us