V6 Engine - 24 Valve Busso

Alfa Romeo's V6 24 valve engine design made its debut in 1992. Initially introduced in 3.0 L guise, production engines would eventually range from 2.5 L to 3.2 L.

The last Alfa Romeo production cars fitted with 24 valve Busso engines were 2007 GT models

This engine was replaced in the 159 and Brera coupe by a new 3.2 L V6 unit utilizing a General Motors designed engine block and Alfa Romeo designed cylinder heads and induction.

 

 

 

Available Products

V6 Camblocks - 2.5 & 3.0 24V Petrol Engines

This set of camblocks suits all Alfa Romeo V6 2.5 & 3.0 litre Quad Cam 24v Engines (97-04). More details

£52.89

V6 3.2 Cam blocks

These cam blocks are made in small batches so availibilty is limited. Check that I have stock before ordering. More details

£60.01

TDC Gauge Holder Tool

Essential tool when replacing the cam belt More details

£27.85

TDC Gauge

A dial gauge and a holder are essential when changing the cambelt More details

£17.50

Exhaust Cam Pulley Tool - Twinspark, JTS, JTD 8v, JTD 2.4 10v & V6 Engines

Ideal for holding or rotating the exhaust cam pulley More details

£14.40

V6 Cambelt Tensioner Adjustment Tool

An easy and cheap tool to adjust the cambelt tension on your V6 More details

£7.74

V6 Crankshaft Pulley Locking Tool

Indispensable if you intend to safely remove/install the crankshaft pulley as the nut holding the pulley in place is very tight. More details

£33.10

V6 Camblock Fixing Bolts

Do not chance damaging your heads, use these slightly longer bolts More details

£2.00

Oxygen/Lambda Sensor Crow's Foot Spanner

Simple little tool which makes what is usually a difficult job much easier More details

£2.83

V6, 1995 Turbo & 1929 TD Flywheel Locking Tool

Great little tool for holding the flywheel in position while you work on the clutch etc. More details

£12.20

V6 Cambelt Tensioner Adjustment Tool - OEM Type

This is our version of Alfa's OEM cam belt tensioning tool. More details

£42.99

V6 24v Camshaft Pulley Puller

This tool fits into the small space that Alfa have left to carry out this job! More details

£39.72

V6 140mm Diametre Crankshaft Pulley Locking Tool

Alfa in their wisdom fitted two sizes of crankshaft pulley to the V6 engine More details

£32.50

Oxygen/Lambda Sensor Crow's Foot Spanner - Heavy Duty Version

This simple little tool makes what is usually a difficult job much easier. More details

£16.34

V6 Valve Removal Tool

If you are intending to rebuild your Alfa V6's heads, this will be invaluable More details

£65.86

Torque Angle Gauge

Ideal tool when refitting your cylinder head. Do not quess the angle, get it right every time More details

£12.72

Flywheel locking tool - A.2.0461

Flywheel locking tools for few models of Alfa's More details

£20.69

41mm A/F thin walled socket

The tool you need to take off and replace your V6's crank pulley nut More details

£18.62

V6 piston liner hold down tool - 24 valve

If you are lifting the head on a V6 engine you need hold down the liners More details

£31.23

V6 cam pulley tool - 1.822.166.000

A really useful tool for loosening the cam pulley fixing bolts on Alfa's V6 engines. More details

£19.65

Ribe tool for removing the clutch fixing screws

You will need one of these to take off the clutch pressure plate. More details

£12.95

V6 & Twinspark Spark Plug Wrench

Believe it or not but this is the ideal tool to taking the spark plugs out of your V6 engine! More details

£15.10

V6 Crankcase Seal Installer

A very useful tool if you need to replace the crank seal behind the clutch More details

£45.20

V6 Hose Clip Pliers - Induction Hoses

Make the job of refixing the induction hose clips on Busso V6 engines so much easier. More details

£23.97

V6 Diff Bearing Press Tool

The tool you need when fitting either a new standard diff, a Q2 diff or a Quaffe diff More details

£10.00

V6 24 Valve Oil Filter Wrench

Ideal tool for removing the oil filter on V6 24 valve engines More details

£10.36

OBD2 CAN BUS Fault Code Reader Scanner

Great little tool for finding out why for example your engine management light has come on and deleting the fault code from your ECU More details

£15.72

Home | About TotallyAlfa | Delivery Information | Terms & Conditions | Search TotallyAlfa | Contact Us