Twinspark (16V)

The Twinspark engine was developed from an 8 valve engine, an all alloy wet-liner block and chain driven into a 16 valve engine with an iron block, alloy head and belt driven.

The Twinspark 16V engines, 1.4, 1.6, 1.8 and 2.0, all use a 10 mm diametre and a 14mm diametre spark plug per cylinder and camshaft phase variator.

Available Products

Twinspark Camblocks 1.8/2.0

Camshaft locking blocks, they fit all Alfa Romeo 1.8 & 2.0 litre 16v twinspark engines. More details

£28.76

Add To Basket

Twinspark 1.4/1.6 (120 PS) Camblocks

These camshaft locking blocks fit Alfa Romeo 1.4 & 1.6 16v (88 kW, 12 0 PS) Twinspark engines, 1996 onwards. More details

£28.76

Add To Basket

Twinspark 147 1.6 (105 PS) Camblocks

These camshaft locking blocks fit Alfa Romeo 147 1.6 16v Twinspark engines (77 kW, 105 PS), 2004 onwards. More details

£28.76

Add To Basket

Twinspark 147 and 156 1.6 (120 PS) cam blocks

These camshaft locking blocks fit Alfa Romeo 147 and 156 1.6 16v Twinspark engines (88 kW, 120 PS), 2004 onwards. More details

£32.98

Add To Basket

Twinspark & JTS Cambelt Tensioner Tool

This tool is used when fitting cambelts to all Alfa Romeo Twinspark & JTS engines. More details

£12.95

Add To Basket

Twinspark & JTS Balance Belt Tensioner Tool

Suitable for 2.0 litre Twinspark & JTS engines. More details

£12.49

Add To Basket

Twinspark (fitted with air conditioning) Balance Belt Tensioner Tool

This tool does the same job as the standard/original tool but because it is slightly shorter it will fit where the standard will not. More details

£12.49

Add To Basket

Twinspark Variator Removal Tool

Use this tool to unscrew the variator from the inlet cam on all Alfa Romeo Twinspark engines. More details

£11.79

Add To Basket

Twinspark and JTS Inlet Cambelt Pulley Tool

This tool allows the loosening/tightening of camshaft pulley's fixings More details

£13.13

Add To Basket

TDC Gauge Holder Tool

Essential tool when replacing the cam belt More details

£27.85

Add To Basket

TDC Gauge

A dial gauge and a holder are essential when changing the cambelt More details

£17.50

Add To Basket

Exhaust Cam Pulley Tool - Twinspark, JTS, JTD 8v, JTD 2.4 10v & V6 Engines

Ideal for holding or rotating the exhaust cam pulley More details

£14.40

Add To Basket

Twinspark & JTS Camblock Fixings

Do not chance using the cam cap fixing bolts and damaging the head. More details

£2.00

Add To Basket

Twinspark Fuel Pump Bezel Removal Tool

Recently redesigned to over come clearance problems More details

£8.82

Add To Basket

Twinspark Oil Filter Wrench

Same pattern and quality as the factory tool More details

£15.04

Add To Basket

Oxygen/Lambda Sensor Crow's Foot Spanner

Simple little tool which makes what is usually a difficult job much easier More details

£2.83

Add To Basket

Twinspark Cylinder Head Removal Tool

This is the tool if you need to remove the head from a Twinspark engine. More details

£13.02

Add To Basket

Twinspark and JTD Sump Removal Tool Set

Kit comprises of the two special tools you will need to remove the sump tray. More details

£24.77

Add To Basket

Twinspark Gearbox Drain Plug Key

The gearbox drain plug on Twinspark engine can be 8mm, 10mm or 12mm A/F - I can supply all three sizes. More details

£6.95

Add To Basket

Twinspark Crankshaft Locking Tool

If your crankshaft bolt is too tight to shift normally this is the tool for you. More details

£5.13

Add To Basket

Twinspark Flywheel Locking Tool

Locks the flywheel into position while you work in the flywheel or clutch fixing bolts More details

£8.85

Add To Basket

Twinspark Balance Shaft Locking Tool

Tool is used to lock the pulley on the end of the balance shafts so that the bolt holding the pulley bolt can be removed without damaging the pulley. More details

£3.84

Add To Basket

Oxygen/Lambda Sensor Crow's Foot Spanner - Heavy Duty Version

This simple little tool makes what is usually a difficult job much easier. More details

£16.34

Add To Basket

Rear Brake Caliper Rewind Tool - adaptor only

Adaptor only for a 3/8" drive rewind tools More details

£6.45

Add To Basket

Rear Brake Caliper Rewind Tool

Rear Brake Caliper Rewind Tool More details

£19.99

Add To Basket

Steering Wheel Puller

Use this tool to ensure you do not damage your steering wheel when removing it More details

£32.03

Add To Basket

Torque Angle Gauge

Ideal tool when refitting your cylinder head. Do not quess the angle, get it right every time More details

£12.72

Add To Basket

Twinspark Valve Removal Tool

If you are intending to rebuild your Alfa Twinspark's head, this will be invaluable More details

£68.86

Add To Basket

Front Brake Caliper Piston Spreader

A great tool for pushing back the caliper's pistons More details

£17.97

Add To Basket

Clutch Centring Guide - A 4 0222 , 1.800.124.000

clutch centring guide for V6's fitted to 164's and 1.4 Twinspark engines More details

£12.60

Add To Basket

Twinspark Cam Belt Tensioner tool - Shorter with a Larger head

This tool is used when adjusting cambelts to all Alfa Romeo Twinspark engines post 2001 More details

£14.76

Add To Basket

Ribe tool for removing the clutch fixing screws

You will need one of these to take off the clutch pressure plate. More details

£12.95

Add To Basket

36mm A/F Socket - Front Wheel Hub Nut on 145., 146, 147, 156, GTV and Spiders etc

A standard socket will probably not fit but this one will! More details

£15.10

Add To Basket

Home | About TotallyAlfa | Delivery Information | Terms & Conditions | Search TotallyAlfa | Contact Us