Products By Engine
Products By Category
- Cam Belt Change
- Cylinder Head Refurbishment
- Cylinder Block Refurbishment Tools
- Oil & Fuel System
- Wheel Bearing / Suspension Tools
- Clutch / Flywheel change
- Drive/Prop Shaft & Diff Tools
Navigation
V6 Engine
Alfa Romeo's V6 engine design made its debut in 1979. Initially introduced in 2.5 L guise, production engines would eventually range from 2.0 L to 3.2 L.
Originally designed as a 12 valve design. In 1993 the first 24 valve version of this engine appeared.
This engine has since been replaced in the 159 and Brera coupe by a new 3.2 L V6 unit utilizing a General Motors designed engine block and Alfa Romeo designed cylinder heads and induction.
Available Products
V6 Camblocks - 2.5 & 3.0 24V Petrol Engines
This set of camblocks suits all Alfa Romeo V6 2.5 & 3.0 litre Quad Cam 24v Engines (97-04). More details
£43.59
I have finally found the time to finish off this project, these blocks are now available. More details
£56.50
Exhaust Cam Pulley Tool - Twinspark, JTD & V6 Engines
Ideal for holding or rotating the exhaust cam pulley More details
£13.78
V6 Cambelt Tensioner Adjustment Tool
An easy and cheap tool to adjust the cambelt tension on your V6 More details
£6.76
V6 Crankshaft Pulley Locking Tool
Indispensable if you intend to safely remove/install the crankshaft pulley as the nut holding the pulley in place is very tight. More details
£33.10
Suitable for V6 engines fitted to - 75, 164, RZ & SZ models More details
£24.99
Do not run the risk of damaging your engine's heads by using the engine's cam cap fixings More details
£2.00
Oxygen/Lambda Sensor Crow's Foot Spanner
Simple little tool which makes what is usually a difficult job much easier More details
£2.83
164 V6 24v Cam Pulley Holding Tool
If you need to help the pulley with damaging it then this is the tool you need. More details
£26.62
V6 & 1929 TD Flywheel Locking Tool
Great little tool for holding the flywheel in position while you work on the clutch etc. More details
£12.20
V6 3.0/3.2 Camblock Fixing Bolts
Do not chance damaging your heads, use these slightly longer bolts More details
£2.00
V6 Cambelt Tensioner Adjustment Tool - OEM Type
This is our version of Alfa's OEM cam belt tensioning tool. More details
£39.20
This tool fits into the small space that Alfa have left to carry out this job! More details
£34.72
V6 3.2 Crankshaft Pulley Locking Tool - Engine Model No 932A.000
Alfa in their wisdom fitted two sizes of crankshaft pulley to the V6 engine More details
£32.50
V6 Hydraulic Cam belt Tensioner Locking Pin
Great little tool to lock the cam belt tensioner on V6 engines with hydraulic tensioners More details
£11.30
Gearbox and Differential 12mm A/F Hex Key
Alfa Romeo gearboxes and differentials use 12mm or 14mm filler plugs. More details
£13.21
Twinspark and V6 Valve Removal Tool
If you are intending to rebuild your Alfa V6's or Twinspark head, these will be invaluable More details
£58.86
4,6 & 8 Cylinder Flywheel Locking Tool
This tool is ideal if you want to lock the flywheel in position while you are replacing the clutch etc. More details
£8.86
The tool can be supplied with copies of Alfa's Technical Bulletins if required More details
£74.53
Latest Blog Entry
Things have have not really gone to plan. Although Wossner assured me that the pistons would fit my engine if seems that their version of fitting and my version differ. ...